产品中心
  • Source:
  • Date: 2022-06-24
为了使高频电路板的设计更合理,抗干扰性能更好,在进行高频线路板设计时应从以下几个方面考虑。

1,利用中间内层平面作为电源和地线层,可以起到屏蔽的作用,并且能降低寄生电感、缩短信号线长度、降低信号间的交叉干扰。

2,走线必须按照45度角拐弯,这样可以减小高频信号的发射和相互之间的耦合。

3,走线长度越短越好,两根线并行距离越短越好。

4,过孔数量越少越好。

5,层间布线方向应该取垂直方向,就是顶层为水平方向,底层为垂直方向,这样可以减少信号间的干扰。

6,增加接地的覆铜可以减小信号间的干扰。

7,对重要的信号线进行包地处理,可以显著提高该信号的抗干扰能力,当然还可以对干扰源进行包地处理,使其不能干扰其他信号。

8,信号走线不能环路,需要按照菊花链方式布线。

9,去耦电容。在集成电路的电源段跨接去耦电容。

10,数字地、模拟地连接公共地线时要接高频扼流器件,一般是中心孔穿有线的高频铁氧体磁珠。
company culture
Jetek Group is a professional manufacturer of PCBs (Included 1-14 layer boards, HDI boards, rigid-flex boards, aluminum boards and so on). Our company was established in 1993 and located in Gaoyao, Zhaoqing. We have a series of fully automatic production equipments and rich PCBs production experience. Flexible order size, fast delivery time, stable quality and competitive price helped us to keep long-term coopertation with our customers.
contact us
Jetek Group
Factory 1:  No.2, Ma'an Development Zone, 324 National Highway, Gaoyao, Guangdong, China
Factory 2:  Building 16, No.16 of Chuangxin Road, Changzhou Street, Rongchang, Chongqing, China

Tel: 008618926528037
Email: mkt01@jetekgroup.com

Overseas Sales Department
Email: info@jetekgroup.com
Tel: +86 0755-23724940

 
Copyright © Jetek Group
Address: Building 16, No.16 of Chuangxin Road, Changzhou Street, Rongchang, Chongqing, China
本站部分图文来源网络,如有侵权问题请通知我们处理!